Arming the System

AWAY MODE, will arm the entire system, when leaving the house.

  1. Close all doors and windows, make sure the READY light is on.
  2. Enter your 4-digit code and press 2 (AWAY)

STAY MODE, will arm the windows and doors, but not the motion sensors.

  1. Close all doors and windows, make sure the READY light is on.
  2. Enter your 4-digit code and press 3 (STAY)

If the ready light is not on, pressing * (READY) will show which zones are open.

Disarming the System

1) Enter your 4-digit code and press 1 (OFF)

 
   


Bypassing a Zone

Bypassing will make that sensor disabled the next time the system is armed.

  1. Double check the zone number you wish to bypass on the zone list.
  2. Enter your code followed by 6 (BYPASS) then the 2-digit zone number.
  3. Press * to save.

For Example, to bypass zone 5 you would press: XXXX 6 05 * (XXXX is your code) You cannot wait more than 3 seconds between pressing buttons.

 

Chime Mode

Chime mode will enable the keypad to beep 3 times whenever a door is opened.

  1. Enter your code followed by 9 (CHIME).
  2. This will toggle the chime mode on or off.

 

Clear Memory/Troubles

In case of an alarm or trouble, the system may need to be reset before it will let you arm.

1) Disarm the system twice.